What you can ask for
A “keep an eye on…”, “tell me when…” or “let me know if…” request is either one thing to follow or
something repeating, read from your words. One thing (“tell me when”, “as soon as”, “keep an eye
on”) is a Follow this as a matter card: Hive follows it as one of your
matters. Something repeating (“every time”,
“whenever”, “from now on”) is a New workflow card that starts on the app event, marked
Every time with your words.
The card
Every card starts as a draft and has the same buttons:- Create (or Run, Add, Save or Delete) does exactly what the card shows, as you.
- Edit in Workflows or Edit in Agent Studio creates the draft and opens it in its builder.
- Cancel closes the card. Nothing is created.
New scheduled task
New scheduled task
What runs, either a prompt or one of your saved agents. When it runs, in plain words with your
timezone (“Mondays 8:00 AM, London”), and the date of the next run. Where the results go, and
the model a prompt runs on.
New one-time task
New one-time task
The same card for something that runs once: when it runs, in plain words with your timezone
(“Once on Wed 14 Oct 2026 at 2:45 PM, London”), under Runs at. After it has run it is
finished, and it never runs again.
New workflow
New workflow
The workflow’s name, its trigger in plain words, its numbered steps and the apps it uses. Each
app shows your Read, Draft or Act setting for it. That setting governs only Ask and
Signals: the workflow’s action steps run whatever it is set to.
New agent
New agent
The agent’s name and description, and the first lines of its instructions (select Show all
instructions for the rest). Also the model, the connected apps with the actions it may take,
any Library folders from this chat, and its skills.
Follow this as a matter
Follow this as a matter
What Hive is waiting for, in your words, and the accounts Signals reads for you, so you know
where it will look. When one of your own open matters clearly fits (the same invoice, deal,
person or thread), the card is titled Add to and that matter, and adds Waiting for: …
(set by you) to it; otherwise it starts a new matter of yours, titled as shown. Press Follow
(or Add to matter); Open matter then opens it on the Signals Matters tab. In a shared
chat, only the person who asked can press it. See
Ask Hive to keep an eye on something.
Run a workflow
Run a workflow
The workflow’s form fields, filled in with what you said: the form of its deployed release,
which is what the run uses, even when a change to the form is saved but not yet deployed.
Hive does not fill in a field that decides where a step sends, such as an email address, a
channel or a phone number, from what you said: type it on the card yourself. That includes a
field a step that writes to a connected app uses for an address, link or number. An older run card
that filled in such a field is refused when you select Run, with “This card was made before
an update: ask Hive again.”
Change any of them on the card, then select Run. The card then shows the run’s status as it goes, from running to done, and links
to the run. A run Hive estimates at more than £5 (500 credits on an earlier plan), or one that
could take more than 50 agent steps, asks first, as it does in Workflows: the card shows the
estimate and Run anyway (up to about £…) (Run anyway (up to … credits) on an earlier
plan), and the run is then held to that estimate. See
Confirming a large run.
Add to a project
Add to a project
What it adds to one of your projects: this chat, a file you sent in it, or both. It says that
everyone with access to the project can read what you add, and how many named collaborators it
has. After Add, Open with the project’s name goes to it. See
Ask Hive to add it.
Change a workflow
Change a workflow
The workflow’s trigger and its steps in the order a run takes them, as they will be after the
change. A step the change adds is marked New, one it alters Changed (with what the step
now does), and the steps it takes out are listed under Removed. Save saves exactly
these steps. If the workflow is deployed or paused and the change alters what a run does, the
card says the change is saved to the draft only: what is deployed stays as it is, and the
change takes effect once you deploy it in Workflows. Renaming a step alone needs no deploy. An
older deployment with no current release goes back to a draft instead, and the card says so
before you save (see Draft, live and paused).
Delete a workflow
Delete a workflow
The workflow’s status and how it starts. Delete does what Delete does in Workflows: the
workflow leaves your workspace and its schedules stop. Its runs and versions are kept for
audit.
Change a draft by chatting
Reply to change the draft: “make it 9am”, “also post to Teams”, “use GPT-5.5”. Hive updates the same card where it first appeared, and your reply shows a note pointing to it. Once you have created or cancelled a card, a new request starts a new draft.Work on your existing workflows
Ask can find, open, change, run and delete the workflows you can see in Workflows.- Find and open. Ask “which workflows do I have?” or “what does Deal research do?”. Hive reads
your workflows and answers straight away: each one’s status, how it starts, its steps in run
order, its apps, and whether you can change, run or delete it. Reading needs no card. For a
live or paused workflow it describes the deployed release, which is what runs, and says when a
change you saved is waiting for the next deploy.
- Schedule. A scheduled workflow’s start gives its schedule in the time zone it runs in, and the date and time of its next run there, for example “Mondays 9:00 AM (Europe/London; next run Mon, 2 Nov 2026, 9:00 am)”. If the time zone you are using Hive in is different, Hive also gives that next run in your time. A schedule that is switched off is said to be off.
- Whose schedules. A workspace Owner or Admin sees every schedule of a workflow. Anyone else sees only the schedules they set up, and Hive says so. An older workflow whose schedule is kept only in its start step runs in UTC; Hive says UTC only when it can see that the workflow has no other schedule. Otherwise it gives the start step’s time and says the time zone is not shown, rather than guessing one.
- Agent steps. For a step that runs an Agent Studio agent, Hive names the agent and reads the instructions of the version the workflow runs, only if you can open that agent in Agent Studio: you own it, it is shared with you, or you are a workspace Owner or Admin. Otherwise Hive says its instructions are not available to you and does not name the agent.
- Long workflows. Hive describes up to 30 steps of a workflow and opens up to 10 agents, and shortens long instructions. It says how many more steps there are; open the workflow in Workflows to see them all.
- Change. Say what to change (“add a step that posts the summary to Slack”, “remove the email step”). The workflow assistant drafts the change over the workflow as it is, and Hive shows a Change card. Reply to refine it before you press Save. Ask for changes in your own chat: a chat someone shared with you offers no Change card. To rename a workflow or change who it is shared with, use Workflows.
- Run. Ask “run my Weekly status workflow now” for a Run card, as above.
- Delete. Hive shows a Delete card for one workflow at a time. To delete several, ask Hive to list them and confirm each card.
How scheduled tasks work
- When. Say how often and at what time: hourly, daily, on chosen weekdays (“every weekday at 9:30”) or, for an agent, on a day of the month (“on the 1st of every month at 9am”). The time is read in your own timezone, the one Hive stored from your browser the first time you opened the app, or London if you have none. Hive cannot run an interval such as “every two weeks”, and tells you so in a sentence.
- Once. Say a date and time, and the task runs once then: “14 Oct at 14:45”, “on 14/10 at 9” (day first), “tomorrow at 9am”, “first thing tomorrow” (9:00 AM), “Friday at 10” (the coming Friday), “in 2 hours”. A date with no year is the next one to come. Say a time as well as a day; Hive asks for one when you do not. The time must be in the future and at most a year ahead, and is checked again when you press Create. A time zone you name in the text (“BST”) is not read: the card shows the timezone Hive used. After it runs, the task is finished and shows Finished on the Scheduled page; turning it off and on again does not run it again. Hive never sets up a repeating schedule in place of a one-time task.
- A prompt becomes a small workflow with one AI step, on the model you chose for this chat. It is deployed and scheduled when you press Create. Each run’s answer is saved in the workflow’s Past runs. A failed run notifies you in your Inbox. When a one-time task has run, your Inbox tells you (“One-time task ran: …”), with a link to the workflow; the answer itself stays in Past runs. This also happens when the task waited for credits and ran later.
- An agent must be deployed first. The schedule runs its deployed version, and each run is saved with the agent’s runs in Agent Studio. If Hive does not run a one-time agent task (for example, the agent was already running or has changed, or Hive was unavailable at the time), your Inbox tells you (“One-time task didn’t run: …”), with a link to the agent. The task’s receipt on the Scheduled page says why, and it does not run again. See Schedule an agent.
Follow-ups Hive suggests
When a chat implies a follow-up you have not asked to schedule (you say “remind me…” or “first thing tomorrow”, or Hive or you promise to check back on something by a time), Hive may suggest one: a New one-time task card saying what it would check and when. It is only a suggestion. Nothing is scheduled until you press Create, which takes one tap; Cancel or ignoring it sets nothing up. Hive suggests at most one at a time, never for a time that has passed, and not again in a chat where you declined one. It never sets up a follow-up on its own, because a scheduled run uses credits and can act on your connected apps.Workflows and agents start as drafts
- A workflow is drafted by the workflow assistant, on Hive’s Efficient model. Create saves it as a private draft. Deploy it in Workflows to turn it on.
- An agent is drafted by Agent Studio’s builder, on Hive’s Efficient model; the agent itself keeps the model you chose for this chat. Create saves it as a draft in Agent Studio. Deploying it is a separate step there.
- A New workflow, New agent or Change card names only the email addresses, phone numbers, links, channels and repositories you typed in this chat, your own connected mailbox’s address and, on a Change card, those the workflow already has. When the draft needs another, Hive asks you to type it instead of filling it in. Nor does a card add or change an Agent step whose answer a step sends to, or point a send at such an answer: make that change on the canvas yourself.
Save a chat as an agent
When a chat has done a job you want to repeat, choose the chat’s name at the top of the chat, then Save as agent. Name the agent (the chat’s title is filled in) and press Save as agent.- Agent Studio’s builder drafts a reusable agent from what you asked in the chat, in order, and from Hive’s latest answer as an example of the output.
- The agent keeps the model the chat last answered with, web access if the chat searched the web, and the Library folders and files the chat used.
- It is saved as a private draft and opens in Agent Studio, where you can review it, test it and deploy it. Nothing runs and nothing is shared.
- The draft may name only the email addresses, phone numbers, links, channels and repositories you typed in the chat, and your own connected mailbox’s address. Otherwise Hive saves nothing and says, for example, “This agent’s draft names finance@acme.com, which you did not type in this chat. Type it in the chat, or add it yourself in Agent Studio.”
- You can only save your own chats, once Hive has answered at least once. You need the Department lead role or above, as for creating any agent. Drafting uses your AI credits (on an earlier plan, the workspace’s shared pool), like an Ask turn.
Who can do what
- Creating a scheduled task or a workflow, following something as a matter, and running a workflow, need the Operator role or above. Creating an agent needs Department lead or above, as in Agent Studio.
- Anyone who can use Workflows can ask Hive to list and open the workflows they can see. Changing or deleting one also needs the Operator role or above. You can change a workflow you own or one shared with you as an editor. Only a workflow’s owner can delete it; Hive tells anyone else so.
- Hive only offers workflows you can see and have permission to run. A workflow must be deployed, and it must start by hand or from a form. A workflow that starts on a schedule or from an app event cannot be run from chat.
- A workflow’s action steps run on the account selected for each step, whatever it is set to (Read, Draft or Act). Your workspace’s limits still apply. A step waits for approval when where it sends came from a public form, an app event, an app’s records, an AI step or a web search, and a run waits for a person at an Approval step. The values you type on a Run card count as your own. See What agents and workflows do by themselves.
- Drafting runs on Hive’s Efficient model and uses your AI credits (on an earlier plan, the workspace’s shared pool, counting towards your own monthly credit limit if your workspace sets one), like any other Ask turn.
In a shared chat
In a chat someone shared with you as Can collaborate, you can ask for a scheduled task, a workflow, an agent, a watch or a workflow run just as in your own chat, with the same roles as above.- What you create is yours: a scheduled task, workflow, agent or watch is made in your account and runs as you, on your apps, seat and credits, and a workflow you run starts as you. Nothing is created in the chat owner’s account.
- Only the person who asked can press a card. Everyone in the chat sees the card, and once it is used they see that it was created, but on a card from someone else’s question there are no buttons. Hive checks again that you can still ask in the chat each time you press one.
- Can view members can’t ask Hive in the chat, so they get no cards.
- “Add this to a project” is only offered in your own chat, because moving a chat into a project is its owner’s choice.
Related
Ask Hive
Ask questions, attach files and act on your connected apps.
Workflow assistant
Draft and change workflows from a description.
Schedules and forms
Manage every schedule on the Scheduled page.
Agent Studio
Build, test and deploy agents.