What Hive can file
Accounts are prepared, checked and approved in Hive, but not sent yet: see
Accounts from a trial balance.
Every form can be prepared on the New filing form, or started from Ask (accounts only on the
form) (see
Prepare a filing from Ask). A
test round prepares a whole set of test filings at once.
The confirmation statement (CS01)
On New filing, choose CS01 · confirmation statement. Statement starts on the confirmation and verification statement, the one Companies House has asked Hive to file; you can choose the plain statement instead:- Confirmation and verification statement (directors’ identity) (the default): the company confirms its details for the review period, and gives each individual director’s identity verification. Add each director (up to 50) with their forename, surname, full date of birth and Companies House personal code, all typed by you.
- Confirmation statement: the company confirms its details for the review period, without the directors’ verification.
Accounts from a trial balance
Hive prepares a company’s micro-entity accounts (FRS 105) or dormant accounts from a trial balance in your Library. It builds them as an iXBRL document, checks them, and puts them up for an owner or admin to approve, on the TEST gateway only.Sending accounts is not available yet. Companies House has not yet published the details
software needs to file accounts through its XML gateway, so Hive prepares, checks and approves
accounts but does not send them. An approved set of accounts says so on its filing page, with no
send button. This section will change when sending is available.
1
Put the trial balance in your Library
Upload the trial balance as an Excel workbook (
.xlsx). Hive reads each cell’s stored value;
it never runs the workbook’s formulas.2
Choose the workbook and the period
On New filing, choose a TEST presenter and Accounts · micro-entity or dormant. Choose
Micro-entity (FRS 105) or Dormant, the Trial balance workbook and its Sheet,
then enter the Period start, the Period end (the balance sheet date), the Date the
board approved the accounts, the Director signing and the Average number of employees.
A period can be at most 18 months, and the accounts must be approved on or after its end.
The workbook list shows your newest Excel workbooks first. To reach an older one, type part of
its name in Find a workbook, or select Show more workbooks.
3
Map each balance sheet line to its cell
For each line the company has, type the cell that holds it, such as
C12. Leave a line blank if
the company has none; Capital and reserves is always needed. Tick Credit where the trial
balance shows the line as a negative number. Hive ticks it to start with for creditors,
provisions, accruals and capital and reserves.4
Tick the statements
Tick the four statements: the audit exemption (section 477, or section 480 for a dormant
company), that the members have not required an audit (section 476), the directors’
responsibilities, and that the accounts follow the micro-entity provisions.
5
Prepare and approve
Select Prepare filing. Hive reads the cells once, as you, and keeps each figure with the
cell it came from. Then select Put up for approval: the filing page shows the balance
sheet, each figure’s workbook, sheet and cell, the subtotals Hive worked out and whether the
balance sheet balances, with the iXBRL document underneath. An owner or admin ticks each
statement and selects Approve this filing.
Amounts are rounded to whole pounds. Hive does not prepare accounts if:
- a mapped cell is empty, holds text rather than a number, or is negative for any line but capital and reserves (check the Credit tick);
- net assets do not equal capital and reserves;
- the workbook is not an Excel workbook, or has no sheet with the name you entered.
Software-only accounts from April 2028
From April 2028, Companies House expects every company to file its accounts as iXBRL using commercial software; WebFiling and paper will close for accounts. Companies House also plans identity checks for everyone who files, accountants included, from no earlier than November 2027, with at least six months’ notice. Hive’s accounts preview is a step towards filing accounts from Hive when that applies.Who can use it
Only workspace owners and admins, in the Hive app. Members do not see it. Agents, workflows and AI clients connected over MCP can never approve or send a filing: Hive refuses them on the server, not just in the app.Set it up
1
Open Companies House filing
In Integrations, select Open Companies House filing. (It opens at
/companies-house.)2
Connect your presenter account
Select Connect a TEST presenter and enter your presenter ID, authentication value and the
envelope email address Companies House writes to if results go unpolled. The address must
not contain a plus sign (
+): Companies House refuses one. Confirm that the presenter account
is used by Hive only, and enter the last submission number you used with any other software
(0 if none). Hive checks the credentials with Companies House, with a status request that
files nothing, before it stores them.3
Add the company
Select Add a company, enter its number and name, then Set authentication code and type
the company’s six-character authentication code.
Identity verification
Under the Economic Crime and Corporate Transparency Act, Companies House is bringing in identity verification in stages:
The Identity verification section of the Companies House filing page helps you get ready.
Your firm’s ACSP number
Enter your firm’s ACSP number (letters and digits, as Companies House gave it to you) and its AML supervisor (the anti-money-laundering body that supervises you, for example ICAEW or HMRC), then select Save. Either can be left blank. Only owners and admins can see or change them, and each save is recorded in the audit log (that a value was set or cleared, not the value). Hive shows these details here only: no Companies House filing carries an ACSP number or a presenter’s identity yet, because Companies House has not published that change to its filing software schemas. Hive will add them to filings when it does.Who is verified at a company
Each company under Companies has a Check identity verification button. Hive reads the company’s current officers and PSCs from the public register and lists each one:
People who are due or overdue are listed first. Hive reads the register only when you select the
button, and stores none of it. It reads up to 100 officers and 100 PSCs, and says so if a company has
more. The workspace’s Companies House source must be on (see
Companies House).
The register never shows a personal code, and Hive does not keep one: you still type a director’s
or PSC’s personal code on the AP01, CS01 or PSC verification statement form, and Hive deletes it as
soon as Companies House acknowledges the filing.
The Statutory Deadline Chaser agent template lists the same identity verification deadlines for
the clients in your Client register (see
UK accounting templates).
Prepare, approve and send a filing
1
Prepare it
Select New filing, choose the form, the company and the officer or PSC, and fill in the
details. Dates of birth, home addresses and personal codes are typed by you. They are never sent
to an AI model. Hive builds the filing and checks it against Companies House’s own schemas; if
Companies House would refuse it, Hive names the fields to fix.
2
Read the preview
Select Put up for approval. The filing page shows the exact message Hive will send, with
the submission number, authentication code and personal codes masked, and its template
hash.
3
Approve it
An owner or admin ticks each statement and selects Approve this filing. The approval covers
that exact preview, the presenter account and the TEST gateway; any change afterwards needs a
new approval. A filing is signed on the day it is approved (UK time) and must be sent that day.
4
Send it
Select Send to Companies House (TEST) and confirm. A sent filing cannot be recalled.
Positive and negative tests
Companies House tests software before approving it to file live, with positive and negative submissions of each form. On New filing, Approval test says which this filing is:- Positive test (the default): the filing as you prepared it.
- Negative test: data Companies House should reject: a label for a filing whose details you chose so that Companies House should reject them, such as a date in the future.
- Negative test: send a wrong authentication code: Hive sends a deliberately wrong company authentication code for this filing only. The company keeps its own code, and every other filing for it sends that one. Companies House does not need this test: its TEST gateway does not check authentication codes on every example company, so a wrong code may still be accepted.
Prepare a whole test round
Companies House reviews the forms in rounds: round 1 is TM01, round 2 AP01 and CH01, round 3 the PSC forms (PSC01, PSC04, PSC07 and the PSC verification statement) and round 4 the confirmation statement (CS01). Under Approval-test rounds on the Companies House filing page, choose a Round and a Form type, then select Prepare and request approval. This needs a connected TEST presenter; it is not available for a live one. Hive prepares six filings for that form type: five positive tests and one negative test with data Companies House should refuse, such as a date in the future. Round 4 is five confirmation and verification statements and one with a review date in the future. The forms Companies House has already accepted from Hive’s own testing (TM01, CH01, PSC04 and PSC07) keep the set they were sent with: four positive tests, one sent with a wrong authentication code and one with data Companies House should refuse. Each filing:- files on one of Companies House’s example companies, 11111111 or 01234567, with invented
people and addresses, and Companies House’s own dummy personal code,
CWMPS832223. If the workspace has not added those companies yet, Hive adds them; set each one’s authentication code before you send anything; - has the customer reference
HIVETESTR<round><form><n>, for exampleHIVETESTR1TM011; - is checked against Companies House’s schemas and put up for approval.
Evidence for Companies House
Evidence for Companies House shows a table of a round’s filings, picked by the start of their customer reference (for exampleHIVETESTR1 for round 1). Cancelled filings are left out. For each
filing it shows:
Select Copy table to copy it as a plain-text table to paste into your email to Companies House,
or Download CSV for a spreadsheet. The table never holds the presenter ID, an authentication
code, a date of birth, an address or a personal code.
Prepare a filing from Ask
An owner or admin can ask Hive in their own words, for example “Northgate Nominees Limited resigned as a director of 11111111 today”, “Northgate Holdings Limited stopped being a PSC of 11111111 on 20 October”, or “prepare the confirmation statement for 11111111, review date today”. Hive fills in only:- the company, the form’s date, and who the officer or person with significant control (PSC) is: a person’s name, a company’s name or a legal person’s name;
- for a PSC, the natures of control and the date the company confirmed the PSC’s details;
- for a confirmation statement, the review date, any new SIC codes or registered email address, and the plain statement instead of the confirmation and verification statement, if you ask for it.
- When nothing more is needed, Hive prepares the filing, checks it against Companies House’s
schemas and puts it up for approval. The answer shows a card: select Review and approve to read
it and approve it on its page. This covers:
- a company or a secretary resigning (TM01), and a secretary’s or company officer’s new name (CH01);
- a company or a legal person no longer being a PSC (PSC07);
- a plain confirmation statement (CS01), when you ask for the plain one. It includes the two legal statements (lawful purpose, and that everything due for the period has been delivered); approving it is how you make them, so read them in the filing before you approve.
- When a person must add details, the card says what is missing. Select Finish the filing to open the form with the rest filled in. This covers a director’s date of birth, an appointment’s consent and identity, everything about a new PSC (PSC01) apart from the name and natures of control, any change to a PSC (PSC04), an individual PSC’s month and year of birth (PSC07 and the PSC verification statement, which also needs the personal code), and each director on a confirmation and verification statement, which is what Hive starts when you ask for a confirmation statement without saying which. The legal statements on a confirmation statement you finish on the form stay unticked until you tick them.
Follow the result
The filing page shows a Receipt (the submission number, the time it was sent, Companies House’s acknowledgement and the latest status result) and a Status timeline. Hive asks Companies House about sent filings every 15 minutes. To ask straight away, select Check status now under Follow the result on a filing that is sent and still waiting for its result. Hive asks Companies House about that one filing and updates the status in the same way the 15-minute check does. You can check each filing once a minute at most. If Companies House has nothing yet, the filing stays as it is. Each workspace has two limits on calls to Companies House. It can send up to 20 filings (and connect presenter accounts) in any 10 minutes, and it can make up to 30 status requests (Check status now and Collect results) in any 10 minutes. The two are counted apart, so following a round’s results never stops you sending the next round: a whole approval-test round, its status checks and the next round straight after all fit. Past a limit, Hive answers “Too many calls to Companies House from this workspace” (or “Too many status requests”) and sends nothing; wait a few minutes and try again.
While a filing is still being sent, the presenter account takes no new filings, so Companies House
always receives them in order. A send Hive turns away for this reason never reaches Companies House,
so it normally does not count toward your workspace’s limit on sends to Companies House.
When the gateway refuses a filing as it arrives, for example for a date it does not allow, the
filing shows Refused by the gateway with the GovTalk error number straight away, and the
presenter account is free for the next filing.
Collect a presenter’s results
On the TEST gateway, the presenter card has a Collect results button. Hive asks Companies House for every result on the presenter account that has not been collected yet. It records the results for Hive’s own filings and ignores the rest. Then it confirms to Companies House that the results were received, so they are not sent again. The card lists both requests with their transaction IDs, which you can quote to Companies House. Confirming receipt clears the results for any software that uses the same presenter account. So Collect results is offered only for a TEST presenter you confirmed is used by Hive alone. A live presenter account is only ever checked one filing at a time.Live filing
Live filing is available only after Companies House approves Hive to file live. Until then it is switched off for every workspace, and every presenter, company and filing carries a TEST badge. Once Hive is approved, live filing is switched on one workspace at a time. In a workspace where it is on:- Select Connect a LIVE presenter to connect your live presenter account. Hive checks the credentials with the same status request, which files nothing.
- Add a company and New filing offer a Gateway choice: TEST gateway or Live Companies House.
- A live presenter, company or filing carries a LIVE badge, and the button reads Send to Companies House (LIVE). A live filing goes onto the public register and cannot be recalled.
- Negative tests are TEST only: a live filing has no Approval test choice, and Hive refuses to send one to the live service.
- An approval covers the gateway too. If live filing is switched off again, an approved live filing can no longer be sent, and Hive stops asking Companies House about live filings.
What Companies House has told us
Companies House’s XML Team answered our questions about approval in November 2026:- Specification. Hive follows version 5.3 of the XML Gateway specification, the current one.
- One approval for every form. A single package reference covers every form type the software supports, so officer, PSC and confirmation statement filings do not need separate approvals.
- Your presenter account. To file live you need a Companies House presenter account. A presenter ID used only for Hive is fine, and it keeps Hive’s submission numbers apart from other software’s.
- Credit account only for paid filings. You need a Companies House credit account only for a filing that has a fee, such as the confirmation statement. Officer and PSC forms are free. No fee is taken on the TEST gateway.
- Review time. Companies House usually reviews a set of test submissions in 5 to 10 working days, and sends its approval by email.
Your data
Filing contents, the masked message and Companies House’s reasons are sealed. Personal codes are deleted as soon as Companies House acknowledges a filing, and the filing’s contents 90 days after its final status. Submission numbers, hashes, timestamps and outcomes are kept.Related
- Companies House — read any UK company from the public register.
- HMRC (Making Tax Digital) — the other filing preview for test workspaces.
- Library — where the trial balance workbook lives.